Other Mobile Home Door Locks
You can opt for a smart lock to turn your deadbolt lock into a keyless lock or as a standalone keyless lock. Most of these locks are as straightforward to fit as a deadbolt and offer the backup option of a manual key.
You can choose between a pushbutton or a Wi-Fi solution for keyless entry to your mobile home.
A lower-tech security measure is the inner chain system that restricts the door opening so unwanted visitors cant push their way into your mobile home when you answer the door.
These install easily with a few screws to hold them in place.
How To Measure The Mobile Home Door Frame
The first starting point is to measure the gap as if the door does not exist you measure the width and the height.
You measure inside the frame because frame sizes can differ depending on the style and the manufacturer.
You measure the space the door will fill rather than the door this rule applies to both interior and exterior doors.
You measure the opening from inside the house for an outward swinging door. When you have this first rough measurement, check if you have a standard door size .
You typically add a half-inch all around for a combination door to adjust for the wooden frame that accompanies the combination door.
Mobile home doors are typically a half-inch shorter and a half-inch narrower than the gap available for them. This allowance gives easy fitting without the damaging process of hammering it into place and damaging your walls.
A further helpful measurement for selecting a replacement mobile home door is the jamb size the thickness of the door space.
You find a 4 jamb size in older mobile homes, but modern ones are 6 or possibly 6.5 thick.
The door wont fill the entire jamb size, but structurally and for the appearance, you dont want a door that is too thick or too thin for the available opening.
Mobile doors come in 2 variations in width and height. The door opening is a rough measurement to select the correct size.
A non-standard door built to order is expensive compared with the standard range.
Installing A Screen Door
A screen door typically comes as part of a combination storm door and screen door unit.
If your screen door is worn or damaged, you can remove that door and replace it with a new screen door.
These doors come in standard sizes to match your storm door, but they are more difficult to source, and you need to go to a specialist mobile home parts supplier.
Also Check: T Mobile Home Internet New Gateway
Thank You For Visiting American Supply
Unfortunately, the site is down while we catch up with all the orders we have. We are so thankful for all of our amazing customers and appreciate your support during this time. We are working to be back online as soon as possible, if you would like to be notified by email when we open the website back up please enter your email below and we will email you A.S.A.
Installing A Storm Door
Most mobile homes have a combination front and back door with an outward swinging storm door and an inward swinging interior door.
If your mobile home has one inward swinging exterior door, then the original storm door is missing.
You can buy a replacement storm door for your mobile home and hang it on the current door frame.
There are two types LH and RH depending on which side the hinges hang.
The door faceplate screws onto the existing door frame, and to finish it add a rubber weatherstrip around the frame.
Don’t Miss: Pine Hills Mobile Home Park
Where Do You Buy And How Much Does It Cost
You can buy your mobile home doors and accessories from all the usual outlets:
- In-person at a hardware store or retail outlet.
- Online or by phone from a specialist mobile parts supplier.
- Shopping platforms like Amazon and eBay.
- Commission a carpenter or manufacturer to build to order.
You can also pick up used doors you can easily cut down wooden ones to create an economical replacement door, and someone remodeling or scrapping a mobile home may have a decent quality used door to sell.
Depending on your budget and design choices, you can shop around and spend under $100 or spend upwards of $1,000.
Installing A Sliding Door
In theory, a keen home improver can flawlessly install a sliding door you need top and bottom running rails, and the job is straightforward.
In practice, a professional will do the job quickly, align everything so it runs smoothly, and give you a warranty for future issues.
Typically, the sliding doors for an exterior fitting come with a frame and involve one stationary glass door and a second glass door that slides behind it to open the door.
This type of sliding door is twice the width of your standard exterior door and necessitates increasing the door opening space by cutting into your wall.
Before cutting into your mobile home walls to install a glass sliding exterior door, check with your local building regulations for how you can have this upgrade certified under the HUD code to maintain the resale value of your property.
The process of installing an exterior sliding door is more complicated because you need to preserve your sidings.
If you plan to replace or upgrade your sidings as part of your mobile home remodeling, schedule the exterior door upgrade for the same time.
Interior sliding doors tend to be less complicated as they can slide into an open position on the wall. You may consider enclosing this in a pocket to ensure no one places furniture or other objects impeding the door opening.
Recommended Reading: Rv Dealers In Boise Idaho
Which Material Is Best For Mobile Home Doors
Mobile home doors are available in many materials. To choose the right one for your home, youll need to consider which quality is most important to you: security, energy efficiency, soundproofing, privacy, or cost. The most popular materials for mobile home doors are aluminum and fiberglass. Of course, wood is still a popular material.
Doorway Opening Size Guide
1-in. wide x 1-in. deep mounting surface is required. Hinge-side shimming may be required to fit existing opening. Use an appropriate shim thickness to reduce the opening to size noted. Shims are not included – household shim materials may include paint stir sticks or wooden yardsticks.
Most standard storm door sizes are 32″ and 36″ wide, some models are also available in 30″ and 34″. Custom storm doors are available in many models, up to 8′ high.
Don’t Miss: Mobile Homes For Rent In Cartersville Ga
Installing An Interior Door
If the frame is in good repair, you can frequently remove the door and replace it with a new one the door attaches to the frame with the hinges.
When you buy an interior mobile home door, it comes without the necessary hardware you can purchase new or recover and reuse the hardware from the current door if it is suitable.
As a minimum, you need a handle and hinges. If you are replacing a bathroom or toilet door, you need a privacy lock as part of the fittings.
If the interior door frame is in poor condition or you want an upgrade, you can buy a mobile home door frame or have a carpenter create and fit a door frame for you complete with hinge slots and door closures.
Mobile Home Steel 6 Panel Outswing 32×76 Rh
The Steel 6 Panel Outswing Door is the perfect door for any mobile home owner looking to install a sturdy, yet stylish outswing door. 6 panels decorate the outside for an appealing look, and the steel core ensures both quality and durability. Outswing doors swing outward, and are guaranteed to satisfy. Coming in a variety of sizes, you’re sure to be pleased with one of our Steel 6 Panel Outswing doors.
Read Also: Single Wide Mobile Home Renovations
Installing An Exterior Door
Your mobile home deck needs to be low enough to give you access to the bottom screws of the existing door.
If the deck is too high, unless you have super DIY skills, it is probably best to call in a professional.
Steps for removing the old door:
- Remove all the screws holding your door in place.
- Gently maneuver the old mobile home door away from the house.
- Dont be tempted to use excessive force or give it a sharp tug you may break bits of your siding or warp the structure, both of which are more expensive to repair.
Like a window, the door frame for your exterior door stays in place with putty:
- Check the opening and remove any old putty or calking use a gentle scraping action.
- The most straightforward way to apply new putty is with putty tape. Warm the tape roll before applying because that makes it easier to use.
- Apply the tape around the opening and remove the paper covering.
Now you can push your new door into place. It would be best if you kept the door as level as possible .
To hold the door in place:
- Put three screws into the frame at waist level on each side of the door.
- Use the builders level and check everything is straight.
- Continue driving screws into the frame above and below the holding screws dont overtighten, or you risk damaging the aluminum frame.
When the door is in place, never loosen the screws. The screws keep the door in place until you are ready to replace it.
Exterior Doors For Mobile Homes
Preparing to Replace your combo frontdoor
Installation of your new door
Removal of your old door
- Replace any rotten wood and any wet insulation.
- Remove and clean all the old door putty from edge of the door.
- Clean the entire area.
Setting your new mobile home door in place
- First, put your putty seal around the edge of the opening on the two sides and across the top.
- Now, set the bottom of door in the base of the opening. Slowly raise the top of the door into place.
- Center the door on the studs and adjust so gap is even around storm door .
- Insert 4 ¼ screws on hinge side two at the top, one in the middle and one at the bottom. Do the same on the handle side.
Recommended Reading: Mobile Homes For Sale By Owner In St Charles Mo
Replacing The Door Frame
External mobile home doors are a complete unit of the frame and pre-hung doors. When you replace your mobile home exterior door, you nearly always replace the frame.
The interior door frames install identically to traditional house door frames. Typically, you replace the door and not the door frame.
If you need to upgrade the door frame, you can buy a standard unit.
Before you can fit the new door frame, you need to:
- Remove the old door frame by carefully removing the screws.
- Gently lever out the door frame, avoid damage to the walls.
- Remove old putty and sealant.
- Apply new putty tape .
- Push the new frame into place and screw it to fix it permanently in place.
Manufactured Home Interior And Exterior Doors
Choosing the Right Exterior Door for Your Mobile Home Doors
New doors add a lot to any home but especially a mobile home. A bigger decorative door has the highest return on investment, plus it makes a mobile home look terrific.
New exterior doors add several advantages to a home. In addition to the fresh new look, you will have added security and additional insulating qualities. Some doors have excellent R-value and insulating values. Some have better soundproofing and privacy.
The best advantage for most homeowners will be the added insulation and security. You can save a good bit of money on heating and cooling costs by installing a new mobile home door. Doors and windows leaks conditioned or warmed air, which costs a lot to replace. Caulking an old door or window is always recommended, but being able to replace a door with one that has higher energy efficiency and safety is best.
Don’t Miss: Mobile Homes For Sale In Bristol Ct